Visit us in Orlando on April 9-12, 2019 at:

COVERINGS 2019 – The Global Tile & Stone Experience

Booth 4278

This will be the 10th year in a row for us at the Coverings Show. We will be displaying Tecnema Breton Group machines at our booth this year:

  • Cutting Machine FS720/2T
  • Profiling Machine PL4/400

Cutting Machine FS720/2T 

Tecnema Breton Group

    •  

Profiling Machine PL4/400

  •  

JOIN US AT BOOTH 4278

 

Visit us in Atlanta on May 8-11, 2018 at:

COVERINGS 2018 – The Global Tile & Stone Experience

Booth 6247

This will be the 9th year in a row for us at the Coverings Show. We will be displaying Tecnema Technology machines at our booth this year:

  • Cutting Machine FS720/2T with PVC Sprayer Tube System Conveyor Roller for Large Sizes
  • Gluing Machine MOD IS 620 
  • UV Drying Machine 620

Cutting Machine FS720/2T with PVC Sprayer Tube System Conveyor Roller for Large Sizes

      • Electro welded metallic structure in heavy carpentry, bearing conveyance, supports and brackets for adjustment units, casings and protections.
      • Conveyor on grinded bench with interchangeable stainless steel wear plates, draft and idle rollers.
      • Conveyor belt made with high thickness rubber and 60 Sh. hardness, suitable for cutting incisions.
      • Variable speed motor through mechanical speed change gear, for throughput speed variations.
      • x2 Operating spindles – with horizontal shaft spindle with terminal supports and joint transmission for direct cutting. Stainless steel chromium plate shaft at thickness and rectified, removable tool holder sleeves and front side shaft support. Tool adjustment:  vertical and motorized, front side horizontal and manual.
      • Guide-counter guide unit on transverse guides, adjustable through hand wheel with decimal gauge.
      • Pressure unit with independent clamping elements, operating pressure vertically adjustable.
      • Stainless steel working zone protection carters and water shielding.
      • Finishing through galvanizing and epoxies painting.
    • Equipped with tool cooling system by means of a complete tube, for more even distribution and pressure of water, and longer life of tooling. Avoids excessive clogging and better adaptability to various blade setups.
    • Waterproof panel, placed at the machine side, with selectors, buttons, emergency and safety buttons in accordance to the actual CEI standards.
  • Swinging pendant push-button strip, with check panel containing all controls and digital displays.

Particular features:

    • Full range of setups can be done.
    • No external part can be damaged by corrosion.
  • Decimal precision of movements.

Gluing Machine MOD IS 620

    • Mixed structure made in electro welded metallic carpentry and anodized structural aluminum, bearing conveyor, supports and brackets for group regulations, casings and protections.
    • Conveyor on belt-powered rolls and aluminum body side.
    • Steel rolls with rubber covering on shielded bearing.
    • Paper/fiber mesh support made in assembled carpentry.
    • Speed variable motorization through mechanical speed change gear.
    • Gluing machine with bearing guide rollers and paper/glass fiber feed for double reel. Paper cutter through carburized and rectified blade. Glue tray with spreading roll and automatic glue level check. Complete self-acting machine with working size gearing.
    • Waterproof pressurized recipient with governor for vinyl glue.
    • Lateral guide unit on regulating slots ended with fixing clamps.
    • Paper/glass fiber pressure unit through water-repellent sponge rollers.
    • Working zone protection carters in polycarbonate.
    • Finishing through galvanizing and epoxies painting.
    • Waterproof panel, placed at the machine side, with selectors, buttons, emergency and safety buttons in accordance to the actual CEI standards.
  • Electric system, placed at the machine side in accordance with standards.

Particular features:

    • Totally automatic working cycle, glue restoration included.
    • Full range of options can be set up.
    • Module subject to any improvement or gluing system completion.
  • No need t adjust for material with constant thickness.

UV Drying Machine 620 10kW

Tecnema UV Dryer Machine

    • The drier works with U.V. lamp system; it is suitable to treat UV light-sensitive resins and has a special design of reflectors.
    • Working speed is between 3 and 6 meters per minute according to the material, viscosity, and quantity of material applied on each piece.
    • The ultraviolet resin is applied through a spreading roll on the gluing machine, after it is positioned on glass fiber mesh and immediately after gluing process pieces enter inside the drier where the polymerization process starts at contact with lamps rays.
    • Polymerization time is less than 30 seconds and the cooling time for pieces is very low; manipulation time of material is immediate.
  • Pneumatic/automatic system of lamps closing if the line is stopping.

JOIN US AT BOOTH 6247

GV Service Coverings'18

Visit us in Orlando on April 4-7, 2016 at:

COVERINGS 2017 – The Global Tile & Stone Experience

Booth 3292

This year GV Service will exhibit Tecnema ECO LINE operating at our booth. This is a Cutting and Profiling line for bullnose and 45° steps, consisting of Cutting Machine, Transfer Device, and Bullnose Machine. 

If you are interested in this complete production line, it is available for advance purchase. Shipping from the trade show site. Email us at sales@gvservice.com.

CUTTING MACHINE  FS 400/1T-2T 11 kW (15 Hp)

The cutting machines mod. ECO LINE FS 400/N have been designed for continuous cutting of ceramic and stone materials. The saws are equipped with conveyor belts featuring variable speed drive motors. The cutting units can be adjusted vertically and transversally and allow the rapid set-up of diamond discs on stainless steel sleeves. The cooling of the cutting discs is performed through the PVC sprayer tube system (optional).

BULLNOSING MACHINE PL 4/400-N 14 kW (19 Hp)

Machine designed for obtaining half-bullnoses, round bullnoses and beveled edges, suitable for ceramics, porcelain stoneware, marble and granite of any size; ideal for producing skirting tiles, 45° steps, bullnose pieces, and bases. Recommended both for small as well as high production rates of porcelain stoneware, natural granite, single- ring and marble with matt or gloss finish of the profile.

Tecnema New PL 4/400-N line has the following configuration:

• No. 1 brand
• No. 2 chamfer 30 ° / 60 ° / 45 °
• No. 1 Profiler
• No.1 Lamellar

The main advantages of this machine are:

  1. Spindles Constructed by Tecnema design: being our spindles designed and manufactured by us are practically eternal and if the customer has an issue, simply replace the motor. The spindle assembly will last over the years also ensuring a higher quality of work efficiency and reduced tool consumption.
  2. Since our machine has multiple tools via a multi-stage grinding process to achieve a bullnose edge, the 2 positions for “chamfering” will be angled at 30 and 60 degree, so the 3rd position doing the actual half bullnose edge will result in less stress on the motor and on the tool, allowing for higher quality and less stress on the tool means it will usually last longer.
  3. Possibility of production steps at 45 ° Thanks to our new system for easy adjustment of the spindles with our machine, we can produce the steps at 45 ° using the first 3 positions [brand- chamfer 1 and 2]. This means a new product for high- value customers (selling price much higher than the baseboard).
  4. Ease into the spindle control: thanks to our new support groups, the spindles can be adjusted easily in 10 seconds.
  5. Durability of the machine: + 2,000 Kg. Machine with consequent advantages in terms of the asset’s useful life (depreciation cost for the customer that needs to be spread over at least 15 years of useful life), and quality of workmanship.
  6. We offered a Tr. Roller + blowing group to separate the bullnose at the exit of the machine and prepare stacking on the last PVC conveyor belt.
  7. Stacking area belt conveyor collecting bullnose is simpler and more effective for the operator.

Join us in booth 3292.  Register to attend here: http://gvservice.com/coverings17


We hope you come and see us and our vendors at the following upcoming shows:

screen-shot-2016-09-13-at-5-19-44-pm






screen-shot-2016-09-13-at-5-22-05-pm






screen-shot-2016-09-13-at-5-17-22-pm






tecnema


Come visit GV Service in Chicago on April 18-21, 2016 at:

COVERINGS 2016 – The Global Tile & Stone Experience

Booth 1076

This year will mark 7th year for GV Service exhibiting at Coverings Show – the largest global tile & stone exposition in North America, providing a stage for the most innovative products, tools and machinery on the market. GV Service will be displaying Tecnema Technology Cutting Machine FS720/2T. The machine is designed for working in heavy duty conditions to cut material up to 1,200mm (48″).

Visit us in booth 1076.

Register to attend for FREE here: http://gvservice.com/coverings16

Coverings 2016
Tecnema Technology FS720/2T Cutting Machine

Tecnema Technology FS720/2T Cutting Machine

Tecnema Technology FS720/2T Cutting Machine
Tecnema Technology FS720/2T Cutting Machine
Tecnema Technology FS720/2T Cutting Machine

Come visit Tecnema Technology and GV Service in Verona, Italy at:

MARMOMACC 2015

International Stone Summit

30September – 3 October 2015

HALL 2, PAD E2

Mr. Giulio Valente will be attending the show, and if you are interested in a factory tour,
please contact us and we can arrange the Tecnema Technology Factory tour in Maranello and accommodations for your visit.

Marmomacc

Come visit Tecnema Technology and GV Service in Bologna, Italy at:

CERSAIE 2015

International Exhibition of Ceramic Tile and Bathroom Furnishings

28 September – 2 October 2015

HALL 44, STAND 41

Mr. Giulio Valente will be attending the show, and if you are interested in a factory tour,
please contact us and we can arrange the Tecnema Technology Factory tour in Maranello and accommodations for your visit.

Cersaie Tecnema GV Service
Tecnema_Newsletter2015